Yuhong Group Co.,Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 800 Tons/ month |
| Delivery Time | 15-35 DAYS |
| Packaging Details | Requirements/ Ply-wooden Case/ Iron Case/ Bundle with plastic Cap |
| Standard | ASME SB163 |
| Base Tube Material | Monel 400 |
| Fin Material | Aluminum |
| Fin Type | G Type |
| Fin Height | Max. 17mm |
| Fin Pitch | 2.1-5 |
| NDT | HT/ECT |
| Application | Heat Exchanger, Marine Components, Condenser etc. |
| Brand Name | Yuhong |
| Model Number | Monel 400 Finned Pipe |
| Certification | ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008 |
| Place of Origin | China |
View Detail Information
Explore similar products
Studded Tube , ASTM A213 T9 / ASME SA213 T11 with 11Cr (SS 409) Studded Fin Tube
ASTM A179 Carbon Steel Seamless Tube with Aluminum ASTM B221 6063 (1060),
ASME SA210 Gr.A1 Seamless Tube with Aluminum Al1060 Embedded G type Fin tube
Welded Helical Serrated Fin Tubes HFW Fin Tube For Per Heating Application
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 800 Tons/ month |
| Delivery Time | 15-35 DAYS | Packaging Details | Requirements/ Ply-wooden Case/ Iron Case/ Bundle with plastic Cap |
| Standard | ASME SB163 | Base Tube Material | Monel 400 |
| Fin Material | Aluminum | Fin Type | G Type |
| Fin Height | Max. 17mm | Fin Pitch | 2.1-5 |
| NDT | HT/ECT | Application | Heat Exchanger, Marine Components, Condenser etc. |
| Brand Name | Yuhong | Model Number | Monel 400 Finned Pipe |
| Certification | ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008 | Place of Origin | China |
| High Light | G Type Nickel Alloy Seamless Tube ，Marine Components Aluminum Finned Pipe ，Monel 400 Nickel Alloy Seamless Tube | ||
Nickel-Based ASME SB163 UNS N04400 Tubing is known for its resistance to high-temperature seawater and steam.
Finned tubes are used in applications where a hot fluid transfers heat through the tube wall to a cold fluid. The rate of this heat transfer depends on three factors: (1) the temperature difference between the two fluids, (2) the heat transfer coefficients between each fluid and the wall of the tube, and (3) the surface area contacted by each fluid. In the case of bare (unlined) pipe, when the outer surface area is not significantly greater than the inner surface area, the fluid with the lowest heat transfer coefficient will determine the overall heat transfer rate.
Monel 400 Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.24max | 28.0-34.0 | 2.50 max | 63.00 min | – |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Physical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.8 gm/cm3 | 0.318 lb/in3 |
Tube Pressure Rating
|
Tube O.D. | Wall Thickness of Tube (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| .028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
| Working Pressure (psig) | ||||||||
| 1/8 | 7900 | 10100 | ||||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 3/8 | 3100 | 4400 | 6100 | |||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 3/4 | 2200 | 3000 | 4000 | 4600 | ||||
| 1 | 2200 | 2900 | 3400 | 3900 | 4300 | |||
1. Rubber plants
2. Power plants
3. Petroleum industries
4. Chemical industries
G-Type Finned Tube Features
1. Compact design
2. High performance
3. Easy to install
4. Small space requirement
5. Less wiring
6. Optimized surfaces
7. Use of state-of-the-art technology
8. Average corrosion protection
9. Lower energy consumption
10. Higher reliability
11. Low maintenance costs
12. High mechanical resistance
Processes of G-type Finned Tube
In G-fin tubes, the fins are made by embedding a metal strip into grooves. The grooves are formed in the base tube. The fins are placed over the grooves and then backfilled, thus holding the fins firmly in place on the base tube. Hence the name G-Fin Tube. The three processes described above are performed simultaneously. Because the fins are firmly attached to the base tube, the heat transfer of the G-Fin tube is expected to be maximized.
G-fin tubes are typically used in high temperature (approximately 400 degrees Celsius) environments. These fins are made of copper, carbon or aluminum and have relatively low resistance to atmospheric corrosion. On the other hand, their mechanical corrosion resistance is acceptable. Stainless steel and carbon steel fin materials can also be used, but special machining and tooling of the steel fin strips is required. Air coolers, radiators, etc. use g-shaped finned tubes.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Trading Company,Seller,Other
Year Established:
2007
Total Annual:
50M-70M
Employee Number:
50~850
Ecer Certification：
Verified Supplier
YUHONG HOLDING GROUP is one of the largest Procurement, Engineering & Contracting Group companies in China. Our group branch company and factory have been already approved by : ABS, LR, DNV, GL, BV, CCS, KR, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9... YUHONG HOLDING GROUP is one of the largest Procurement, Engineering & Contracting Group companies in China. Our group branch company and factory have been already approved by : ABS, LR, DNV, GL, BV, CCS, KR, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9...
Get in touch with us
Leave a Message, we will call you back quickly!