6mm - 32mm Cutting Range Steel Welding Wire Machine Conical End Feature

Product Specification

 
 
conical end 6mm - 32mm Cutting range Welding Wire machine Welding Wire equipment
 
 
 
Wire rope cutting Machine with smoke exhaust
RD series wire rope annealing machine, with high melting speed and easy to operate, are applicable for melting steel rope of various dimensions, especially elevator ropes, mine ropes, crane cables and other high quality steel ropes. The steel ropes melted ar neat and smooth with conical and spiral ends. These machines are mainly applied by steel rope manufactures and customers.
 
 
 
Product features:
1. Cleverish in shape and convenient to move
2. With a wide range in melting diameter, the steel ropes can be melted without replacing any parts within the range of prescribed diameter.
3. Easy to operate, no spanner is needed for tightening device, and the welding head is nice in apperance
4. Low working power, energy saving and safe in use
 
 
Special point:
1use seal, integration of the whole machine design, introduction of foreign top technology, more advanced than similar products in the country. With high efficiency and low energy consumption, stable and reliable operation, simple operation and other characteristics. 2, can meet the needs of different specifications of the shape of a single product, or a combination of size matching diversified package 3, a power shake out device, to ensure that the packaging is not damaged 4, a special thermal insulation structure. Can not only play the role of the best energy-saving, and ensure operator safety, application of the equipment in welding consumables industry, with moisture, rust, prolong welding material storage features 6, adapt to PE, PVC, and other various heat shrinkable packaging materials.
 
 
 
 
production equipment parameter
 
1. Wire material surface pre-treatment
1.1 high shelf pay-off:Put a wire rod, without motor
1.2 Scribble and automatic stop switch: wire out
of the pay-off machine through the steel ring with
a diameter of 200 mm, if a few circle wire
entwined, steel ring that was taken to the other
side, t the bottom of the stroke switch will send
signals, and the entire line emergency stop.
1.3 Repeated bending mechanical shell and
wire ball strong scrubbing device: the wire rod
at least six direction perpendicular(National
initiative)Bending heat treatment to strip iron
oxide on the surface of the wire.
Eight peeling wheel, material: ZG45 steel, hardness of HRC50, Wheel
inner diameter Ф 115 --- Ф 120mm.
Wheel service life of 6000 hours. After
peeling ,the wire through period of tapered hole, use wire clean ball strongly wipe the
surface of wire rod, and does not damage
the wire surface, reduce the waste into the electrolytic pickling tank, ensure the
effect of pickling, facilitate drawing; By pressure cold water irrigation and block and
impurities, rust on the surface of the wire rod export high-pressure gas blowing
device, reduce by wire out of the water.
 
 
 
 
Take-up system:
№1 Ф800mm I-Spool take-up machine
① Main transmission adopts the transmission efficiency high service life long V transmitte take form;
②) With pneumatic brake and pneumatic top
device
③ Motor:15 kw variable frequency motor；
④ Ribbon cable with screw thread, maintenance
is simple and practical
⑤ take up by Ф800mm I-spool
⑥ There were equipped with a mechanical locking device, at any speed, power outages, fly out to ensure that the wheel will not hurt workers
 
 
№2 Ф500mm Trunk-type Unloading Machine
The speed mach with Wire drawing machine.Single layer take-up,The surface of drum plat WC.Dia of drum is 560mm, take-up plate is 500kg, The machine have:2 take-up plate,2 wheel Barrow.Motor : 15KW
 
 
 
 
Technology parameters
Overall dimensions (L*W*H) 4500*840*1720(mm)
Max packing dimension (W*H) 270*100(mm)
Packing Speed 10-13 sets/min
Max sealing length 200mm
Conveyor horizontal hight 800+30(mm)
Working pressure about 0.5Mpa
Power source 50Hz/AC380Vthree phase five wire
Power(Max) about 15kW