Product Specification

Sysolution Sync & Async Control Box M70B-L 2 Ethernet outputs 1.3 Million pixels

Sysolution Sync& Async Control Box M70S

Product Introduction:

Sysolution M70B-S series adopts industrial grade quad core processor, integrates four cortex-a35, dual core mali-g31 GPU, quad core main frequency 1.5GHz, can withstand 90 ℃ high temperature and can operate stably, and the memory supports 1gb+8gb (compatible with 2gb+16gb) LPDDR3. The chip can support GSM, WCDMA, TD-SCDMA, EVDO, TDD-LTE, FDD-LTE and other systems. It is a highly integrated product.

Function Characteristics:

1. Two Gigabit network ports are output, and one network port is used as backup to ensure the stability of image transmission；
2. Support the external connection of eight element environmental sensor R68 through 485 interface to display environmental information without secondary development;
3. Support optional 4G modules. The models of modules in different countries are different. Please provide the country of use for shipment.
4. Support optional 4G modules. Different models fits for different countries. Please confirm the country before shipment；
5. support switch sync/asynchronous mode；
6. Lora wireless timing multi screen synchronization；
7. Onboard WiFi module for wireless communication；
8. Support AP mode and Station mode；
9. Support cluster remote control through web platform；
10. Built in web server, it supports local web page production, program release and display control of PC, mobile phone, pad and other user terminals, cluster remote program release and display control, and cluster remote monitoring of screen status；
11. The user terminal connects to the WiFi hotspot of M70BS. The default SSID is "SN number" and the default password is "12345678"；
12. The timing switch, volume and brightness can be set centrally through the management system；
13. Support to play programs according to the program list；
14. The timing switch, volume and brightness can be set centrally through the management system；
15. Support USB camera；
16. Support NTP precise automatic timing；
17. Software kit: AIPS4.0 Cloud publishing platform, PC software LedOk Express, mobile APP:LedOK Kit.

Product Appearance:

Control box M70B-S

Naked card M70S

Product Parameters:

Interface Parameters/Define:

Control box M70S

Bare card labeling M70S

Inside interfaces definition in the below:

Power-DC 5-12V IN Interface (Three input modes: DC, 3.84 2P, 2.54 4P)

No.	Definition	Attribute	Description
1	GND	Power ground wire	Power ground wire

SIM socket interface ( PH2.54 2*3Side seat)

No.	Definition	Attribute	Description
1	VCC	Power cord	Power cord
2	GND	Power ground wire	Power ground wire
3	RESET	Reset pin	5-12V Power input
4	NC	empty	empty
5	DATA	data pin	data cable
6	CLK	clock pin	clock cable

USB DEBUGFunction skip socket ( 2.00MM Vertical contact pin)

No.	Definition	Attribute	Description
up	USB	USB	USB
down	DEBUG	DEBUG	debug

HDMI input (horitzontal)

MATSR download interface ( PH2.00 4P Straight socket)

No.	Definition	Attribute	Description
1	NC	empty
2	GND	GND	GND
3	RX	receiver	receiver side
4	TX	send	send side

TTL/232 interface ( PH2.54 4P White pin holder)

No.	Definition	Attribute	Description
1	VCC	Power supply	5V/NC3V3
2	RXD	receiver side
3	TXD	send side
4	GND	GND

485 interface (two connection ways: 2P blue pins and PH2.00 4P straight socket)

No.	Definition	Attribute	Description
1	RS485_B	data
2	RS485_A	data

Remote cut power interface1 ( PH2.54 4P white pin holder)

Remote cut power interface 2 ( PH2.54 4P white pin holder)

Test and Sync/Async key

3.5mm earphone socket

Antenna sockets Outer bolt and inner hole of elbow

No.	Definition	Attribute	Description
1	4G	4G
2	WIFI	WIFI
3	GPS	GPS

Brightness sensor interface (2.54MM2P white hook seat)

No.	Definition	Attribute	Description
1	VCC	Power supply
2	ADC	ADC	brightness interface

External key interface (2.54MM2P white hook seat)

No.	Definition	Attribute	Description
1	VCC	Power supply
2	CPU_RESERVED_3	IO	external key interface

External operation indicator interface ( 2.54MM2P white hook seat)

External power indicator interface ( 2.54MM2P white hook seat)

RS5 interface (divide into two parts in the two sides , PH2.54 one is 16P 2x8 socket,

another is 10P 2X5 socket)

2	CPU_RESERVED_1	IO	reserved interface
3	CPU_RESERVED_2	IO	reserved interface
4	CPU_RESERVED_3	IO	external key
5	FPGA_B5	IO	reserve interface
6	CPU_GD32_TX	serial port	serial port
7	CPU_GD32_RX	serial port	serial port
8	ES8388_LIN	IO	Reserved microphone interface
9	ES8388_RIN	IO	Reserved microphone interface
10	GND	GND	GND

16P display interface

No.	Definition	Attribute	Description
1	GIGE_MX_A+
2	GIGE_MX_A-
3	GIGE_MX_B+
4	GIGE_MX_B-
5	GIGE_MX_C+
6	GIGE_MX_C-
7	GIGE_MX_D+

FPGA download interface

Working Parameters:

1. It is recommended to use an independent (12V/3A or above) power supply for the control card；

2. High working temperature will cause a sharp decline in power efficiency. If the control card and the module share the same power supply, please ensure that the control card has a stable voltage and a reasonable actual current supply.

Dimensional Drawing:

Installation dimensions of control box M70S

Installation dimensions of bare card M70S

Accessories:

Notes:

1. It is strictly forbidden to disassemble and assemble the product by yourself.

2. It is strictly forbidden to plug and unplug the SIM card with power.

3. It is strictly forbidden to use improper voltage for power supply.

4. It is strictly forbidden to share the 200w/5v switching power supply of the screen to supply power to the card, which will lead to unstable system operation and low horn sound.