50/125 Fiber Diameter High Precision Fiber Cleaver CE/ROHS/REACH Certificate

Product Specification

• Method of use and regulation ofsafety operation. 

1. Please read the instruction manual carefully before operation, keep instruction manual and fiber cleaver in a good place at the same time..
2. In order to prevent the damage of the machine performance , please note the following when you use   fiber cleaver.

3. Don’t get wet fiber cleaver.

4. Don’t put the fiber cleaver in a place where is wet or dusty.

5. Under normal temperature preservation in order to avoid high temperature cause deformation.

6. Don't hit so hard fiber cleaver.

7. Leave about 12 mm long bare fiber.

8. Regularly clean up dirt on pressure fiberboard with alcohol, don't use propanone or corrosive solvent cleaning pressure fiberboard.

9. Constantly clean up fiber box and ensure no dust and oil dirties in the slot.

• Operating steps

  1.    Open the pressure fiberboard and cover plate, put bare fiber in the  fixture that was stripped coating (125mm/900mm), according to user’s requirement to ensure cutting length.	2.     Push to the front of the cutting slider(Figure), press and close the pressure fiberboard and cover plate to fix optical fiber.
  3. After close cover plate, ensure that the fiber is in a horizontal line.	4. Push cutting slider back a one-time to finish cutting.
  5. Open cover plate and pressure fiberboard, then take out the fiber. In order to avoid damaging the fiber, fiber face don’t touch anything after take it out.	6. After finish cutting, please clean up the broken fiber and don’t damage blade for later use.

   

◎ Blade’s replacement and adjustment

0-15 cutting points are  indicated on the blade.

☉Please clean up blade and fiber fixture when the cleaver cannot be used properly(Do not wipe fixed optical fiber mat with alcohol).

☉If it still doesn’t work, please adjust the position of the blade.

Please according to the following operation sequence when you adjust the position of the blade.

A. Adjust the blade(According to the maked on the blade 0-15 face to turn)

B.Adjust blade height

C. Replace new blade

Attention:please don’t adjust cleaver with inappropriate “-” type screwdriver or hex wrenches.

 
Why choose TAKFLY--Advantages as follows:

• So far, our products have been widely installed in many big worldwide project and work perfectly. Many project contactors ask the first and second operators to purchase fiber items from Takfly for their new project.
• In addition, we also have builted long term cooperation with Lapp, Amper, Telefonica, orange, Corning, Amphenol, SENKO, and Ericsson.

All enquiry are warmly welcomed here no matter it's small or big, we promise to provide all customers high quality and good price and fast delivery service.

 
FQA :

1. Q: Are you a manufacturer?
A: yes, we are a manufacturer , FTTH solution and data center total solution provider in Shenzhen, China, established in 2000.

2. Q: What's your MOQ?
A: MOQ can be 1 pcs, but the price is not competitive.More quantity,the price will be more competitive.

3. Q: Can you quote FOB price?
A: yes. We can delivery by air, DHL, TNT, UPC, FEDEX, etc. For big quantity we will deliver it by sea.

We can quote price with freight and lead time for you, after you let us know detailed requirements with quantity.

We have competitive shipping forwarders. For more solutions, you can feel free to contact us.

4. Q: How is your quality?
A: Our production is according to IEC, Europe standard. CE, ISO, RoHS, CPR, and ANATEL certified.

All the products are 100% test before delivery.

5. Q: What's your lead time?
A: It depends on the quantity and products. For fiber optic patch cord, the lead time can be 2 -3 working days within 5000 pcs. We keep the regular products in stock. Also, we can deal with urgent orders.

6. Q: What's your warranty?
A: Depends one different product, we have1 years warranty for patch cord since delivery, but only responsible for non-artificial damage. For artificial damage, we can repair it for you for free, freight will be paid by your side.

7. Q: What's your packing?
A: International export standard package.If you need to print your logo on the packing, please let us know before we quote.

8. Q: Can you offer OEM/ODM?
A: yes, we can. all products accept OEM /ODM. we can sign the Confidentiality Agreement.

9. Q: Can I have a sample?
A: It depends on which products, Free sample provide under 10 usd. Freight will be paid by buyer before delivery.

10. Q: How can I order?
A:1. send mail or inquiries with product name, specification, and quantity to us . Provide your receive address if you need FOB,CIF,CFR price.

2. We will offer our quotation with lead time.

3. After the quotation confirmed, we will send a PI with our bank account.

4. Production will be arranged after the payment received.

5. Confirm the consignee with you before we deliver it.

6. The tracking number will be provided after the delivery.

11.what is your payment term?
A: T/T, Western Union, Paypal, MoneyGram at once. For big amounts, can be 50% deposit in advance, 50% balance paid before delivery.

With the same quality standard, if you could get better price from the market, TAKFLY also could support you same price.

3 years work experience in optical fiber industry, It's honored to be your professional product assistant.