Qingdao Exceed Fine Chemicals Co.,Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 1000mt/month |
| Delivery Time | 5-8working days |
| Packaging Details | 25kg/drum; 200kg/drum; 1000kg/IBC drum |
| Trade name | Ethacure 300 |
| Mf | C9H14N2S2 |
| Cas no. | 106264-79-3 |
| Other names | DMTDA |
| Appearance | Light Yellow Transparent Liquid |
| Application | polyurethane elastomer cured crosslinking agent,polyurethane curing agent,Polyurethane elastomer |
| Product name | Dimethylthio toluene diamine(DMTDA) as curing agent for Plastic Track |
| Un no | 3082 |
| Brand Name | EXCEEDCHEM |
| Model Number | ETHACURE300(DMTDA) |
| Certification | ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Dimethylthio Toluene Diamine Polyurethane Curing Agent
102 40 9 Hydroxyethyl Ether Polyurethane Curing Agent
C10H14O4 Cas 104 38 1 Granule Hydroquinone Bis Ether
MDBA Equivalent To UNILINK 4200
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 1000mt/month |
| Delivery Time | 5-8working days | Packaging Details | 25kg/drum; 200kg/drum; 1000kg/IBC drum |
| Trade name | Ethacure 300 | Mf | C9H14N2S2 |
| Cas no. | 106264-79-3 | Other names | DMTDA |
| Appearance | Light Yellow Transparent Liquid | Application | polyurethane elastomer cured crosslinking agent,polyurethane curing agent,Polyurethane elastomer |
| Product name | Dimethylthio toluene diamine(DMTDA) as curing agent for Plastic Track | Un no | 3082 |
| Brand Name | EXCEEDCHEM | Model Number | ETHACURE300(DMTDA) |
| Certification | ISO9001 | Place of Origin | China |
CAS 106264-79-3 polyurethane curing agent
| Model | FR22 |
| Consistency | Polyurethane |
| Density(KG/M3) | 19±6 |
| Expansion Multiple(time) | Max. 80 |
| Cuttable Time(30mm diameter)(minute) | Approx. 30 |
| Optimal Application Temp.(℃) | +5~+35 |
| Min. Application Temp.(℃) | +18~+25 |
| Min Temp. of can(℃) | 10 |
| Tensile Strength(Aluminum Plate)(KPA) | 120 |
| Dimensional Stability | ±3% |
| Water Permeability | none |
| Tack- free Time(minute) | Max. 10 |
| Temp. Resistance(Long Term)(℃) | -30~+80 |
| Temp. Resistance(Short Term)(℃) | -40~+110 |
| Contents of formaldehyde and benzene | None |
| Thermal Conductivity(W/M.K) | 0.042 |
| Corrosion Resistance | Qualified |
| Fire Retardant Factor | B2 |
| Toxicity after curing | None |
| Shelf Life(18~22℃, store upside) (Month) | 9 |
Special Protection Information
Respiratory Protection: Adequate ventilation must be provided. If above the NOHSC exposure standard, use SA approved respiratory protective equipment. If dust is generated during cutting or machining/grinding/sanding of cured product, wear disposable dust mask (Type P1). or better as determined by you risk assessment. When using resin system (including hardener) with fibres, use combination mask with vapour and dust particle filter.
Eye Protection:Use SA approved chemical splash goggles.
Protective Clothing:Wear chemical resistant gloves such as butyl rubber or neoprene rubber gloves. Apply full dermal protection to un-covered skin. Wear full length trousers and long sleeved shirts and safety boots.
CONSULT SAFETY EQUIPMENT SUPPLIERS FOR RECOMMENDATIONS.
Effects of Exposure
Eyes:May cause irritation and redness.
Inhalation:May cause irritation of the respiratory tract. Isocyanates are known to cause sensitisation of the respiratory tract.
Skin:Prolonged and/or frequent contact can result in irritation of the skin.
Swallowing:May cause some gastrointestinal irritation.
First Aid Procedures
Eyes:Flush with water for at least 15 minutes.
Inhalation:Remove to fresh air. If breathing is difficult, seek immediate medical assistance.
Skin:Remove contaminated clothing for laundering. Wash with soap and water. Do NOT use solvents.
Swallowing: Do NOT induce vomiting. If person is conscious, they should drink large quantities of water. Seek medical advice immediately.
Spill or Leak Procedures
Eliminate all sources of ignition and ventilate area. Wearing protective equipment, stop spill at source, dam area and if possible pump liquid into salvage tank. Alternatively, absorb residue with vermiculite or sand. Scoop up using non-sparking tools into labelled waste container. Flush area with water, but prevent it from entering waterways. Dispose of waste in accordance with local, state and federal regulations. Reporting of spills/leaks may be required under EPA and Dangerous Goods regulations.
Fire Extinguishing Procedures
Wear protective clothing and equipment including self-contained breathing equipment. In general, use foam or carbon dioxide to put out fires. (Refer to MSDS). Cool fire exposed containers with water spray.
Storage and Handling Procedures
DG Class 3 (Flammable liquid). Store in properly closed, labelled containers in a cool area, fitted with floor level and breathing zone ventilation to remove vapours which collect at these levels. Ensure all sources of ignition are eliminated. Keep away from strong oxidising agents. Do not transfer to unmarked containers. Do not transfer to unapproved plastic containers. Earth containers when pouring to prevent the discharge of static electricity.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2013
Total Annual:
10000000-20000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Qingdao Exceed Fine Chemicals Co., Ltd is a high-tech enterprise that integrates manufacturing and trading. We specialize in the production of polyurethane-based products.Our company is dedicated to investing in research and development of cutting-edge products, collaborating with leadin... Qingdao Exceed Fine Chemicals Co., Ltd is a high-tech enterprise that integrates manufacturing and trading. We specialize in the production of polyurethane-based products.Our company is dedicated to investing in research and development of cutting-edge products, collaborating with leadin...
Get in touch with us
Leave a Message, we will call you back quickly!