Automobile Simulation Transport Vibration Table Sine Wave Vibration Waveform

Product Specification

Automobile Simulation Transport Vibration Table Sine Wave Vibration Waveform

Product Name:Analog Transportation Vibration Table

Model:

JD-100D

First, the product overview:

The simulated transport vibration table is mainly used to simulate the collision of goods and articles produced by the product in the car trunk when the vehicle encounters different road conditions such as bumps, uphills, downhills, corners, etc. Collision, extrusion of items and articles, etc., cause damage to the product, thereby further improving the quality of the article and the quality of the package. In order to obtain the basis for the assessment of the packaging of the articles and articles by obtaining the influence of the actual working conditions on the articles in the laboratory.

Principle:

This equipment is manufactured in accordance with US and European transportation standards and with reference to similar equipment in the United States.

product structure:

1) Test bench bottom plate requirements: 5~10MM cold rolled steel plate

2) Fence: According to the standard of military standard GJB 150A.16-2009, all round wooden boards are surrounded by wood. The specifications of the board are thick 50mm*150mm wide pine wood. The specific requirements are as follows:

Dongguan Jiedong Test Equipment - Cao Min 18938501589:

Precautions:

1. When loading the test sample, be sure to install it firmly and tighten the screw lock;

2. When the test sample is found to be unclamped, it should be re-clamped after stopping the machine, and it is strictly forbidden to operate when the machine is not stopped;

3. Test samples should be placed in the middle as much as possible;

4. The test sample should not exceed the work surface and should not be overloaded.

Second, product features:

1. Low price: the price is only 10% of the similar products in the United States;

2. Vibration frequency digital instrument digital display vibration frequency, high precision;

3. Synchronous mute belt drive with low noise;

4. The sample holder adopts rail type, which is convenient and safe to operate;

5. The base of the machine is equipped with heavy-duty channel steel base and vibration-reducing rubber. It is easy to install and runs smoothly. It does not need to install anchor screws.

6. DC motor speed regulation, stable operation and strong load capacity;

7. According to the reorganization of similar equipment in Europe and America, rotary vibration, in line with European and American transportation regulations;

8. Applicable to toys, electronics, furniture, gifts, ceramics, packaging and transportation industry to test the packaging of products.

Third, the main technical parameters:

1. Maximum test load (kg): 100kg;

2. Frequency range: 100 ~ 300rpm;

3. Amplitude range (mm): 25.4 mm (inches);

4. Vibration mode: reciprocating type (commonly known as horse race);

5. Work surface size: L × W (cm) 100 × 120;

6. Body table: SUS#304 stainless steel;

7. Outer box part: baking anti-static powder spray paint table top aluminum alloy outside the electrolytic board;

8. Time setting: 0seconds seconds, 99hour hours;

9. Start time setting: 0-15seconds;

10. Speed ​​regulation mode: DC speed regulation;

11. Power supply voltage (V/HZ): □AC 1 ∮220/50Hz;

12. Power consumption (KVA): 0.75;

13. Machine weight (kg): 150;

14. Environmental conditions: temperature Temperature 5 ~ 40 ° C; humidity Humidity ≤ 85% RH;

15. Standards: EN, ANSI, UL, ASTM, ISTA, GB/T4857.7-2005 and other domestic and international transportation standards.