Shenzhen FRIDA LCD Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 5000pcs |
| Delivery Time | 10work days |
| Packaging Details | 60pcs/box original packaging |
| Outline Dimension | 228.6×149.2×2.39mm |
| Active area | 216.96(H)×135.60(V)mm |
| Number of pixels | 1280(H)×800(V) |
| Brightness | 330cd/m2 |
| Color Gamut | 50% |
| Product Name | Tft Lcd Display |
| Brand Name | BOE |
| Model Number | BP101WX1-206 |
| Certification | ROHS |
| Place of Origin | China |
View Detail Information
Explore similar products
30 Pins Lvds 21.5 LCD Panel 5v 1920x1080 Display Wide Viewing Angle
30 Pin Edp TFT HD Display Anti Glare 11.6 Inch LCD 1920x1080 All Viewing Angle
EDP 30 Pin 11.6 LCD Screen 1920x1080 All Viewing Angle 220 Nit IPS TFT
RGB IPS TFT LCD Display 40 Pin 1920x1080 Lvds 15.6 Inch Laptop Panel
Product Specification
| Payment Terms | T/T | Supply Ability | 5000pcs |
| Delivery Time | 10work days | Packaging Details | 60pcs/box original packaging |
| Outline Dimension | 228.6×149.2×2.39mm | Active area | 216.96(H)×135.60(V)mm |
| Number of pixels | 1280(H)×800(V) | Brightness | 330cd/m2 |
| Color Gamut | 50% | Product Name | Tft Lcd Display |
| Brand Name | BOE | Model Number | BP101WX1-206 |
| Certification | ROHS | Place of Origin | China |
10.1 Inch 1280x800 Tft Lcd Display 40 Pins Lvds BP101WX1-206 330 Nits
General Description:
The manufacturer of BP101WX1-206 is BOE /BOE, the resolution is 1280×800, the display ratio is 16:10, the pixel arrangement is RGB vertical strip, and the point distance is 0.0565× 0.1695mm, panel type is A-SI TFT-LCD, prominent features are white LED, built-in LED driver, wide viewing Angle. Display mode is ADS, normal black display, transmission type. Contrast ratio is 600:1, color saturation is 50%NTSC, response time is 25 ms, optimal viewing Angle is symmetrical up and down, drive screen voltage is 3.3V, panel input current is 303mA,The operating temperature is 0°C to 50 °C, the storage temperature is -20°C to 60°C, the backlight type is WLED, the backlight life is 15K Hours, the single tube voltage is 16.8V, the single tube current is 120mA, the LED driver module is included, the backlight interface brand is I-PEX. The model of the backlight interface is 20455-040E-12, and the backlight interface is defined as LVDS-40P1C6B-050H.
Features:
Specifications:
| Parameter | Specification | Unit | Remarks |
| Active area | 216.96(H) × 135.60(V) | mm | |
| Number of pixels | 1280(H) × 800(V) | pixels | |
| Pixel pitch | 169.5 | ㎛ | |
| Pixel arrangement | Pixels RGB stripe arrangement | ||
| Display colors | 16.7M(6bits + Hi-FRC) | colors | |
| Display mode | Transmission mode. Normally Black | ||
| Outline Dimension | 228.6 × 149.2 × 2.39typ. | mm | |
| Weight | 150 (max) | gram | |
| Surface Treatment | Hard Coating, 3H, Low Reflection (Front Polarizer) | ||
| Back-light | Bottom edge side, 1-LED Lighting Bar Type | 36* LED Array |
| Parameter | Symbol | Min. | Max. | Unit | Remarks |
| Power Supply Voltage (LCD Module) |
VDD |
-0.3 | 4.2 | V | |
| Back-light Power Supply Voltage | HVDDOUT | -0.3 | 18 | V | |
| Back-light LED Current |
IHVDD |
- | 96 | mA | |
| Back-light LED Reverse Voltage |
VR |
- | 2 | V | |
| Operating Temperature | TOP | 0 | +50 | C |
|
| Storage Temperature |
TST |
-20 | +60 | C |
Electrical Specifications:
|
Parameter |
Symbol |
Values |
Unit |
Notes |
||
| Min | Typ. | Max | ||||
| Power Supply Input Voltage | VDD | 3.0 | 3.3 | 3.6 | V | Note 1 |
| Power Supply Current | IDD | - | 303 | - | mA | |
| LED Driver Power Supply Voltage | HVDD | 3 |
- |
18 | V |
|
| LED Driver Power Supply Current | IHVDD |
- |
568 |
- |
mA | |
| LED Driver Efficiency | η | - | 85 | - | % | |
| Positive-going Input Threshold Voltage |
VIT+ |
- |
- |
+100 | mV |
Vcom = 1.2V typ. |
| Negative-going Input Threshold Voltage |
VIT- |
-100 |
- |
- |
mV | |
| Differential input common mode voltage |
Vcom |
- |
1.2 |
- |
V | VIH=100mV, VIL=-100mV |
|
Power Consumption |
PD |
- | 1.0 | W | ||
|
PBL |
- | 2.4 | W | Have Driver | ||
|
PTotal |
- | 3.4 | W | |||
Notes: 1.The supply voltage is measured and specified at the interface connector of LCM.The current draw and power consumption specified is for 3.7V at 25C Max value at White Pattern. 2.Calculated value for reference(VLED X ILED) 3.CTF of Power Supply Current:PD/PBL.
Optical Specification:
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | Remark | |
| Viewing Angle range | Horizontal | Θ3 | CR > 10 | 70 | 80 | - | Deg. | Note 1 |
| Θ9 | 70 | 80 | - | Deg. | ||||
| Vertical | Θ12 | 70 | 80 | - | Deg. | |||
| Θ6 | 70 | 80 | - | Deg. | ||||
| Color Gamut | - | 50 | - | % | ||||
| Luminance Contrast ratio | CR | Θ = 0. | 600 | - | - | Note 2 | ||
| Luminance of White | 5 Points | Y |
Θ = 0. |
280 | 330 | - | cd/m2 | |
|
White Luminance uniformity |
5 Points | ΔY5 | - | 80 | - | |||
| White Chromaticity | Wx | Θ = 0. | Typ. -0.03 | 0.313 | Typ. +0.03 | |||
| Wy | 0.329 | |||||||
| Reproduction of color | Red | Rx | Θ = 0. |
Typ. -0.03 |
0.600 |
Typ. +0.03 |
||
| R | 0.340 | |||||||
| Green | Gx | 0.315 | ||||||
| G | 0.565 | |||||||
| Blue | Bx | 0.150 | ||||||
| By | ||||||||
| 0.125 | ||||||||
| Response Time (Rising + Falling) | TRT |
Ta= 25.C Θ = 0. |
- | 25 | - | ms | ||
| Cross Talk | CT | Θ = 0. | - | - | 2.0 | % | ||
Notes :
1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing angles are determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock direction with respect to the optical axis which is normal to the LCD surface.
2. Contrast measurements shall be made at viewing angle of Θ= 0 and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state . Luminance Contrast Ratio (CR) is defined mathematically.
Interface Connection:
The electronics interface connector is 20455-040E-12.
| Terminal | Symbol | Functions |
| Pin No. | Symbol | Description |
| 1 | NC | Non Connection |
| 2 | VDDIN | Power supply VDDIN=3.3V (Typ.) |
| 3 | VDDIN | |
| 4 | VDC | Power supply VDC=3.3V (Typ.) |
| 5 | NC | Non Connection |
| 6 | CLK EDID | CLK for EDID function use |
| 7 | Data EDID | CLK for EDID function use |
| 8 | RIN0- | LVDS Negative data signal (-) |
| 9 | RIN0+ | LVDS Positive data signal (+) |
| 10 | GND | GROUND |
| 11 | RIN1- | LVDS Negative data signal (-) |
| 12 | RIN1+ | LVDS Positive data signal (+) |
| 13 | GND | GROUND |
| 14 | RIN2- | LVDS Negative data signal (-) |
| 15 | RIN2+ | LVDS Positive data signal (+) |
| 16 | GND | GROUND |
| 17 | LVDS_CLK- | LVDS Negative CLK signal (-) |
| 18 | LVDS_CLK+ | LVDS Positive CLK signal (+) |
| 19 | GND | GROUND |
| 20 | RIN3- |
LVDS Negative data signal (-) |
| 21 | RIN3+ | LVDS Positive data signal (+) |
| 22 | CE_EN | Color engine enable |
| 23 | NC | Non Connection |
| 24 | NC | Non Connection |
| 25 | GND | GROUND |
| 26 | NC | Non Connection |
| 27 | NC | Non Connection |
| 28 | GND | GROUND |
| 29 | NC | Non Connection |
| 30 | NC | Non Connection |
| 31 | LED_GND |
LED GROUND |
| 32 | LED_GND | |
| 33 | LED_GND | |
| 34 | NC | Non Connection |
| 35 | LED_PWM | LED driver PWM duty |
| 36 | LED_EN | LED driver enable |
| 37 | CABC_EN | CABC function enable |
| 38 | VLED |
Power supply VLED=3~18V (Typ.) |
| 39 | VLED | |
| 40 | VLED |
Dimensional Requirements:
| Parameter | Specification | Unit |
| Active Area | 216.96 (H) × 135.6 (V) | |
| Number of pixels | 1280(H) X800 (V) (1 pixel = R + G + B dots) | |
| Pixel pitch | 0.1695 | |
| Pixel arrangement | RGB Vertical stripe | |
| Display colors | 16.7M | |
| Display mode | Normally Black | |
| Dimensional outline | 228.6*149.26*2.39 (Typ.) | mm |
| Weight | 150 (Max) | gram |
| Back-light | LED, Horizontal-LED Array type |
Matters Needing Attention:
Cautions for handling the module:As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible.As the LCD panel and back - light element are made from fragile glass material, impulse and pressure to the LCD module should be avoided.As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning.
Cautions for the module characteristics:Do not apply fixed pattern data signal to the LCD module at product aging.Applying fixed pattern for a long time may cause image sticking.
Cautions for the operation:When the module is operating, do not lose CLK, ENAB signals. If any one of these signals is lost, the LCD panel would be damaged. Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
30000000-35000000
Employee Number:
245~295
Ecer Certification：
Active Member
Shenzhen FRIDA LCD Co., Ltd is a high-tech enterprise specializing in LCD display and touch panel, smart cloud, software, hardware and mold development, is committed to becoming a standard and customized audio and video solution provider in AIOT field for our customers. FRIDA LCD was founded in 201... Shenzhen FRIDA LCD Co., Ltd is a high-tech enterprise specializing in LCD display and touch panel, smart cloud, software, hardware and mold development, is committed to becoming a standard and customized audio and video solution provider in AIOT field for our customers. FRIDA LCD was founded in 201...
Get in touch with us
Leave a Message, we will call you back quickly!