Highway Guardrail Type Road Delineator Flexible Posts Traffic Reflective Sheet

Product Specification

2024 Highway Guardrail Reflective Sheet line type road delineator

Linear delineators are used to outline the linear outline of the road and are suitable for curved sections such as curves. A traffic safety facility with retroreflective properties that is set along the edges of both sides of the road to display the outline of the road boundary and guide vehicles to drive normally. Functionally speaking, outline signs are a line of sight guidance facility.

1. High luminous brightness. The delineator has high luminous brightness, which can break through rain and fog at night and guide the driver safely and effectively.
2. Actively emitting light, dynamic warning, the delineator flashes at a certain frequency at night, and human vision is more sensitive to changes, so its dynamic warning effect is very strong. The active light-emitting delineator can avoid rain and fog to a large extent. interference.

1. Measure to determine the location
Before installing the delineator, you first need to measure the width and length of the vehicle surface and choose an appropriate location. Typically, the delineator should be affixed to the side of the vehicle and should be at a certain distance from the top and bottom of the door to ensure the logo looks nice and symmetrical.
2. Clean the vehicle surface
Before installing delineators, make sure the vehicle surface is clean and smooth. Appropriate detergent and water need to be applied to the vehicle surface to ensure thorough cleaning. At the same time, do not use cleaners containing solvents or acidic and alkaline substances to avoid damaging the car paint.
3. Attach contour marks
Apply tape to the appropriate location on the outline mark and attach it to the body. Slow down when attaching signs to ensure correct placement and aesthetic appearance. Be careful not to stretch the tape too tight or bend it, as this will affect the adhesion of the sign.
4. Compaction outline mark
Once the delineation is properly applied to the car body surface, appropriate pressure needs to be applied to ensure full contact between the mark and the surface. For signs on flat surfaces, you can easily compact them using tools that have the same apparent dimensions. For signs with metal or concave surfaces, softer tools will be needed to avoid damaging the surface.
In short, when installing delineators, the above important steps should be followed to ensure the appearance of the sign and the stability of long-term use.

Outer packing: Standard packing
For a small quantity of orders or sample order, we will generally choose to transport by air (DHL, TNT, etc)
Large orders we generally use the ocean shipping.

Roadsafe Group Limited was founded in 2005, we have our own factory to make all kinds of road safe products, our products could sell all around the world.Our most advantageous products are all materials road studs, especially ABS road stud which enjoys the high quality and low price in China. Meanwhile, we have other traffic products, such as traffic cone, delineator, delineator post, convex mirror, guardrail board, beads reflective panel, reflective films, traffic light, warning board, traffic paint, etc.We always put quality first, customer supreme, the observance of good faith-based.

1.OEM Service
Your own design is appreciated; we can make the approval sample according to your golden sample.
2. QC Service
a) Before the order to be confirmed, we should check the material & color of fabric by sample which should be strictly.
b) We will be tracing the different phase of production from the beginning.
c) Every bad quality will be checked & cleaned before packing.
d) Before delivery clients could send one QC or point the third party to check the quality.
e) We will try our best to help clients when problem occurred.
3. After-sale Service
a) EXW, FOB, C&F are also available for us.
b) If the products need certificate, we can also provide.

Q:Can I get a sample before bulk order ? how can I get it ?

A:Sample is free ,but freight collect.
You may tell us your express account No.
Also you could prepay the freight cost by Western union, we will send out sample asap once getting your payment.
Q:Can you do customers' styles?
A:Yes ,just send us the drawing ,then we could open a new mould for you to produce it as your request.
Q:Is this retail product?
A:sorry, it is wholesale product .
Q:Can we visit your factory ?
A:Certainly.welcome your visit.
Q: How to ensure the cargo quality?
A:We will supply bulk sample before shipping.They can represent the cargo quality.
Q: Why choose Roadsafe-Group Limited?
A:We are a manufacturer not trading company, we have produced the road safe products for years in Beijing, so the
price is quite competitive in the market, and the quality is suprior.
Q: What's the payment method?
A:T/T: Accept USD, EUR.
Western Union: Quickly to the account, Priority in delivery
Behalf Paying: Your Chinese friends or your Chinese agent can pay for in RMB.