1000 KN Steel Metal Universal Tensile Testing Machine With ISO ASTM AATCC

WAW-1000G 1000KN Steel metal servo control computerized electro-

hydraulic universal tensile testing machine

Wing Wang Whatsapp/Wechat/Mobile: 86-15550413681

Overview

This machine is mainly used in the tensile mechanical properties test of the steel strand wire test. Widely used in space flight and aviation, petrochemical industry, mechanical manufacture, plastic, rubber, ceramic, building materials, metal material, constructional engineering and university and college, mining industry, research institution, etc.

Application

1. Ф8.00~Ф21.80mm Prestressed steel strands, aluminum stranded wires, steel wire ropes, cables, cable ropes, and load-bearing cables are tested and studied in mechanical tensile properties at room temperature.
2.  suitable for Ф9.53mm, Ф11.10mm, Ф12.70mm, Ф15.24mm,Ф18.00mm, Φ19.30mm, Ф21.80mm wire strand test .
3. Tensile tests on metal materials such as round steel bars, ribbed steel bars, straight steel bars, round bars, metal plates, metal bars, castings, forgings, bolt fasteners, metal pipes, scaffolding steel pipes and special non-metallic materials , compression test, bending test, shear test, peel test, tear test, low cycle test, test and test the mechanical properties of the material.
4. Tensile tests and studies on standard strand,indented strand,compact strand,Epoxy resin steel strand,PC Strand,unbonded steel strand or monostrand,galvanized steel tests. 
5. Tensile tests and studies on messenger wire,(guy wire,core wire or strength member,(earth wire/ground wire,barrier cable,structure cable and so so.
6. Tensile tests and studies on PCB Steel Bars for Prestressed Concrete ,P(plain bar),HG(helical grooved bar),HR(helical ribbed bar),R(ribbed bar),CRB650/CRB800/CRB970and so so on.
7. Tensile tests and studies on Sheet, sheet, strip, foil, flat, wire, bar, profile, pipe, sheet, square, round, rectangular, toroidal, cast iron, cast iron, non-ferrous alloy, pipe sections and so on.

Standards

GB/T5224-2014 Steel strand for prestressed concrete;
GB/T5223.3- Steel bars prestressed concrete;
GB/T21839-2008 Steel for prestressed concrete-Test methods;
ISO 15630-3:2002Steel for the reinforcement and prestressing of concrete-Test methods-Part 3:Prestressing steel,MOD);
ISO 6934-4 steel for the prestressing of concrete -- part 4: strand
ASTM A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A416 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
GB/T228.1-Metallic materials-Tensile testing-Part1:Method of test at room temperature;(ISO 6892-1:MOD);
ASTM E8M-04.Standard Test Methods for Tension Testing of Metallic Materials [Metric]
BS EN10002-1:ASTM E9-89a.Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
GB/T7314Metallic materials-Compression testing at ambient temperature;
GB/T232-Metallic materials-Bend test;(ISO 7348:2005.MOD);
GB/T10623Metallic materials-Mechanical testing-Vocabulary;(ISO 23718:MOD);
GB1499.1Steel for the reinforcement of concrete - Part 1: Hot rolled plain bars(ISO6935-1:NEQ);
GB1499.2Steel for the reinforcement of concrete-Part2: Hot rolled ribbed bars(ISO6935-2:NEQ);
GB13788-cold rolled ribbed steel wires and bars;
JGJ/T27-2014Standard for test methods of welded joint of reinforcing steel bars;
GB/T244Metallic materials-Tube-Bend test;
GB/T3091-2015Welded steel pipes for low pressure liquid delivery;
GB/T3098.1-2010Mechanical properties of fasteners-Bolts, screws and studs

Test extension with corresponding fixtures

1. Three-point bending/four-point bending device: the spanning span is 30-600mm; the spanning span is 30-1000mm; the rolling roller diameter ranges from 3 to 300mm;
2. Rebar/ribbed steel bar with attachment Ф6~14mm, Ф16~25mm, Ф28~40mm;
3. High-strength bolt drawing attachment M3~33mm (standard pitch/fine pitch/inch pitch/US pitch/German pitch);
4.Electronic extensometer: gauge length 25mm, 50mm100mm, 200mm

Inner water-proof plastic film packaging

Outer plywood box for export

Shipping time: 10-20 days after payment

1. Are your company a trading one or a factory?
Factory + trading company (integration), 21 years focusing on test instruments field, 5 years exporting experience.

2. After an order is placed, when to delivery?
Generally about 15 working days, If we have inventory, we can arrange shipment within 3 working days.
Please be aware that our production lead times depend on specific items and item quantities.

3. What about the warranty with after - sales services?
12 months warranty after delivery. Besides,we can help you to repair your problem controller freely,even it's not from our factory. What you need to do is to send us the controller.
After the warranty, the professional after-sale service team will provide perfect technical support,and help customer solve problems encountered while using our product, handles guest problems and complaints in
a professional and timely.

4. What about the services and product' quality?
Each instruments must be carried out 100% quality examination and test when shipping and delivery goods.
Product use training, each of our product provide video training to show you how to install & operate.
All the products meet with: ISO, ASTM, AATCC, BS, EN, DIN, JIS and other required standards.