M25 Thread Dustproof Waterproof IP68 Nylon Cable Gland With Balck Customized

Product Specification

M25 Thread Dustproof Waterproof IP68 Nylon Cable Gland With Balck Customized Colors

Thread Type : M / PG Thread
Material : Nylon PA66,UL94-V2

IP Protection : IP68

Working Temp :-40 ºC to 100 ºC . Short-Term to 120 ºC.

Application :Cable clamping range, tensile strength waterproof and dustproof, acid and alkali resistant, grease and general solvents.The main function is to make the line unobstructed, keep the cable sealed, and ensure the insulation level at the cable joint, make it safe and reliable operation.If the seal is not good, not only will cause oil leakage soaked paper dry, and moisture will invade the inside of the cable, so that the paper insulation performance decline.

Method of use

1. Nylon cable waterproof connector is a supporting article for cables,

which is mainly used on distribution box and power distribution cabinet.

2. The connector can lock the cable,

and the other end can be connected to the upper part of the equipment box body,

or can be threaded according to the selection.

3. Access to electric equipment with internal threads at the inlet and outlet. Generally,

it is a mechanical control box, distribution board, machine, etc.

Main function

Keep the line unobstructed, keep the cable sealed,

ensure the insulation grade at the cable connector of the cable certificate,

and ensure its safe and reliable operation.

If the seal is not good, it will not only cause the oil-immersed paper to dry up due to oil leakage,

but also moisture will invade the inside of the cable,

which will reduce the insulation performance of the paper.

Installation attention
conductor connection conductor connection requires low resistance and sufficient mechanical strength, and no sharp corners can be found at the junction. The middle and low voltage cable conductor connection is usually pressed.
(1) choose suitable conductor and connecting tube with electrical conductivity and mechanical strength;
(2) the gap between the inner diameter of the pressure pipe and the outer diameter of the connecting core is 0.8~1.4mm.
(3) the resistance value of the joint after crimping shall not be 1.2 times higher than that of the equal section conductor, and the tensile strength of the copper conductor joint shall not be less than 60N/mm2;
(4) before crimping, the outer surface of the conductor is coated with conductive adhesive on the inner surface of the connecting pipe, and the oxide film is destroyed by a wire brush.
(5) sharp corners and burrs on connecting pipes and conductor conductors, smoothing with files or sandpaper.

Company introduction

Yueqing hongxiang connector manufacturing co., ltd.is a professional manufacturer of various specifications of wire and cable connectors. The main product is a metal cable waterproof connector with a protection grade of ip68.It has the characteristics of large clamping cable range, strong tensile force, waterproof, dustproof,salt resistance, acid and alkali resistance, alcohol resistance, grease and common solvents, etc.Other products include anti-electromagnetic cable connector, porous cable waterproof connector, marine stuffing box, reducer head, brass plug ca.

FAQ

Q: Are you trading company or manufacturer?

A: We are the factory. Also we can export the goods by ourselves.

Q: How long is your delivery time?

A: Generally we can send out the the goods within 3-7 days if the goods are in stock.

Or it is should be 7-30 days if the goods are not in stock, it is according to your order quantity.

Q: Do you provide samples? Is it free or extra?

A: Yes, we could offer the samples for free charge but do not pay the cost of freight.

Q: What is your terms of payment?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance,

balance before shipment.

Q: How about the after-sale service?

A: Any feedback or comments are welcomed.

We will try to make the best assistant to let you maximum satisfaction.