High Drilling Performance 8 Wheels Rubber Crawler Track Undercarriage With

Product Specification

 Crawler Track Undercarriage With Folding Tower

Product Description

Product Tech Details

Product Advantages

Crawler chassis is usually used as an important structural component of equipment, responsible for assuming the operational responsibility of the equipment during application. From the specific application effects it presents in the application, it demonstrates the following obvious advantages in terms of operation:

Operational advantage 1: Good stability. Thanks to the tracked structure, the tracked chassis has excellent stability during operation due to its lare contact area with the ground, ensuring a very stable operating effect.

Operational advantage 2: Fast running speed. Although compared to other chassis structures, the tracked chassis may have a lower operating speed, its specific operating performance shows that it can still achieve faster operating speed and fully meet everyone's requirements in terms of operating speed.

Operational advantage three: long-lasting operation. From the specific performance of tracked chassis in application, it can achieve long-lasting operation with its own structural and performance advantages.

Product Application

The track chassis is roughly divided into two types based on the material of the track: one is a rubber track chassis, and the other is a steel track chassis.Rubber track chassis is mostly suitable for small light industries and small engineering machinery industries. Light industry generally refers to agricultural machinery within one to four tons. The construction machinery industry is mostly used in the small-scale drilling industry.

There are various types of walking modes for general tracked chassis: gearbox, gearbox rear axle, hydraulic motor, motor reducer, and other walking modes, as well as various equipment chassis such as tracked transport vehicles, agricultural harvesters, and drilling rigs

Product Working Attentions

(1) It is forbidden to turn sharply on the concrete ground or hard road, otherwise the track core will be worn and the belt body will be twisted.

(2) When crossing the ridge, it is necessary to move forward at a low speed at right angles to the ridge. When crossing the ridge with a height of more than 10 cm, it is necessary to use a springboard, otherwise the track may fall off or be damaged.

(3) It is forbidden to walk and turn sharply for a long time on the gravel road, otherwise the track will be accelerated, worn and cracked.

(4) Do not work on rotten fields, otherwise the track will slip and make the traveling mechanism accumulate mud and tangle grass, affecting the normal operation.

Working environment is as follows:

(1)The temperature of the rubber crawler is generally between -25° + 55°.

(2)The salt of chemicals, oil and seawater will accelerate the aging of the track. In such an environment, the track should be cleaned frequently.

(3)The road surface with sharp protrusions (such as steel bars, stones, etc.) can damage the rubber track.

(4)The edge stone, rut or uneven road surface of the road will cause cracks on the ground side pattern of the track edge. This crack can continue to be used without injuring the steel cord.

(5)Gravel and gravel pavement will cause early wear of the rubber surface in contact with the load-bearing wheel to form a small crack. Severe moisture will invade, causing the core iron to fall off and the steel wire to break.