plant used High Quality Overhead Crane With Hook

QD model 5-50/10t overhead crane with hook is mainly composed of bridge, running gear of crane, trolley and electrical device,  etc. It is divided into two working classes: A5 and A6 according to the use grade and load-up condition. 2. There are three kinds of method for entering the platform of cab: from the side, from the end and from the top. The figure is the  side entrance; arrowhead Ashows the end entrance; the top entrance is at the place there is no door. 3. The figure shows that the cab is mounted at the left end. 4. Safe slide wire or angle iron can be used for electric conduction of the crane; it can be either at the opposite side of the cab (same  as the figure) or at the sameside of the cab. 5. Operation of the crane shall be finished in the cab completely. 6. Ho is the in creased height of buffer of the crane, H0≤250. 

   In summary ,our company has set up a complete quality control system with basic complete devices to guarantee product quality

Brief Introduction to Quality Control:
 

  A complete quality control system has been set up to guar antee that all products of the company comply with national technical standards.

         Ⅰ.Sound quality control machanism

         Quality management and quality test departments are staffed with engineers,technicians and inspectors,who are responsible for quality management,test and information feedback of products of the company.

       A quality control test system has been set up to conduct self test,mutual test and inspector test for each spare part,unit and between producing procedures.Rates of qualified products,waste products needing repair are checked to relate the rates with workers' economic benefits so as to guarantee quality of spare parts and units.

       Ⅱ.Reliable guarantee by establishment of physical lab,chemical lab,measuring room,whole-machine test platform.

  1.Physical lab

  The lab is equipped with metallographic phase analyzer,X-way nondestructive tester,metallographic microscope,hardness tester and professional staff to guarantee effective quality inspection of heat processing,soldering,material and spare part bought from outside.

2.Chemical lab

  This lab is equipped with WFJ-P digital spectrophotometer,TG328A electro-optical analysis scale(precision reaching 1/10000 gram),CS-TL4B carbon flow tester and professional staff to conduct effective chemical analysis over raw materials and spare parts from outside.

3.Measuring room

  Staffed with professionals,the room has over 300 measuring devices.For important spare parts like gears of decelerator box,there are devices like deflector tester and tooth gauge to guarantee quality of those spare parts.In addition,testers for electric hoist,traveling crane,gantry (bridge)crane are available,such as theodolite,level and portable hardness gauge.

4.Whole-machine tester

   The test platform for performance of whole traveling crane and the computer-aided test platform for performance of electric hoist have been set up to provide data critical for the performance of the machines.The following tests can be conducted:①Empty-load test②Still-load test(including 25% overload test)③Dynamic test④Rated load test

After-sales Service promises:

 Ⅰ. Quality problems of products sold by our company will be solvedas per the"Three Guarantees"system of our company by the "Three Guarantees"service team;

Ⅱ.Related personnel will be sent to the site immediately after receiving quality complaints(by call,letter or oral notice)from clients;

Ⅲ.Personnel involved in after-sales service shall be serious and considerate in handing the problem to make clients crane-free;

Ⅳ.In addition to solve quality problems,personnel involved in after-sales service shall train clients,answer their technical inquiries and related questions free of charge.

Ⅴ.Related cost for products with quality problem will be shouldered by our company.Our company charges for quality problems caused by clients (or problems after the warranty term ),but the charge will not be higher than the expense(or cast);

Ⅵ.Establish the client-orient concept to offer timely,serious,sonsiderate and complete service,and value the image of the all the time to serve the company and clients.

If you want to know more or don't understand, please contact us.