Ruixin Energy Equipmnet
| Payment Terms | T/T |
| Supply Ability | 1 set 4 weeks |
| Delivery Time | 4-8 weeks |
| Packaging Details | Wooden Box |
| Name | 5K Wireline In-Situ Test Sub |
| Material | Alloy Steel&Nickel Alloy |
| Connection Type | O&B |
| ID | 2"~7" |
| Function | allows for only the joint that was broken to be tested, without filling the whole lubricator system |
| Work Pressure | 3k 5k 10k 15k |
| Service | Standard&H2S |
| Brand Name | Ruixin |
| Model Number | 2inch ID 2.5inch ID 3inch ID 4.06inch ID 5-1/8inch ID |
| Certification | API |
| Place of Origin | China Baoji |
View Detail Information
Explore similar products
Steel Pressure Control Slickline Stuffing Box 16 Inch
8 Inch Wireline Torsion Tester For Torsion Experiment Instrument
Pump In Tee Wireline Pressure Control Equipment API Standard
4ft 6ft 8ft Lightweight Lubricator Wireline And Slickline Tools
Product Specification
| Payment Terms | T/T | Supply Ability | 1 set 4 weeks |
| Delivery Time | 4-8 weeks | Packaging Details | Wooden Box |
| Name | 5K Wireline In-Situ Test Sub | Material | Alloy Steel&Nickel Alloy |
| Connection Type | O&B | ID | 2"~7" |
| Function | allows for only the joint that was broken to be tested, without filling the whole lubricator system | Work Pressure | 3k 5k 10k 15k |
| Service | Standard&H2S | Brand Name | Ruixin |
| Model Number | 2inch ID 2.5inch ID 3inch ID 4.06inch ID 5-1/8inch ID | Certification | API |
| Place of Origin | China Baoji | ||
| High Light | Wireline In Situ Test Sub ，slickline In Situ Test Sub ，5K 5KWireline Pressure Control Equipment | ||
5K Wireline In Situ Test Sub Wireline Pressure Control Equipment
Ⅰ. Introduction
During Wireline operations it is necessary to break the quick union between the lower lubricator and the BOP to remove the tools within. When this joint is reconnected it is normal practice to fill and pressure test the entire lubricator system prior to opening the wellhead valve. The Wireline In-Situ Test Sub allows for only the joint that was broken to be tested, without filling the whole lubricator system, saving a substantial amount of time and large volumes of expensive test fluid, as well as alleviating the problems associated with dumping test fluids into the well. As an added advantage, the In-situ Pressure .The Wireline In-Situ Test Sub allows for the lubricator system to be pressure tested whilst pressure sensitive equipment (such as perforating guns)are in the lubricator.
II. General Technical Parameters
OTIS Quick Union
| Bore | Work Pressure | Service | Connection | Seal Dia. |
| 2.5＂ | 5K 10K | Std H2S | 5＂-4ACME | 3.5＂ |
| 2.5＂ | 15K | H2S | 5-3/4＂-4ACME | 4＂ |
| 3＂ | 5K 10K | Std | 6-1/2＂-4ACME | 4.75＂ |
| 3＂ | 15K | Std H2S | 7-1/2＂-4ACME | 5.5＂ |
| 4＂ | 5K | Std H2S | 8-1/4＂-4ACME | 6.188＂ |
| 4＂ | 10K | Std H2S | 8-3/8＂-4ACME | 5.25＂ |
| 5＂ | 5K 10K | Std H2S | 9＂-4ACME | 6.75＂ |
| 5＂ | 15K | Std H2S | 9-1/2＂-4ACME | 6.25＂ |
Ⅲ. Use method
1. Before loading the upper cylinder into the lower cylinder, the two sealing rings on the upper cylinder and the sealing holes of the lower cylinder should be evenly coated with sealing grease.
2. Align the upper cylinder with the sealing hole of the lower cylinder and carefully assemble it. Do not damage the sealing surface and O-ring during assembly.
3. Use a hook wrench to tighten the union nut.
4. Connect the pressure pipeline with the quick connector.
5. Complete the abo:ve steps and immediately start the pressure test.
Ⅳ. Maintenance
After using this product every time, check whether the thread, Sealing surface and O-ring are damaged. If everything is normal, apply lubricating grease to the thread and sealing ring, and take protective wire for storage. If any damage is found to the O-ring or sealing surface, the manufacturer shall be contacted in time for repair and replacement.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2012
Total Annual:
200-500
Employee Number:
One~Fifty
Ecer Certification：
Verified Supplier
Ruixin Energy Equipment Ruixin Energy Equipment is slickline manufacturer focused on wireline PCE , wireline tools, coiled tubing tools, etc.. Our factory and technology R & D center is Located in the national technology enterprise incubation industry park - 401B, High-... Ruixin Energy Equipment Ruixin Energy Equipment is slickline manufacturer focused on wireline PCE , wireline tools, coiled tubing tools, etc.. Our factory and technology R & D center is Located in the national technology enterprise incubation industry park - 401B, High-...
Get in touch with us
Leave a Message, we will call you back quickly!