Ruixin Energy Equipmnet
| Payment Terms | T/T |
| Supply Ability | 1 set 3 weeks |
| Delivery Time | 3-4 weeks |
| Packaging Details | Wooden Box |
| Name | 2 Inch Anti Blow-up Wireline Pressure Gauge Hanger |
| Size | 2.375inch-5.5inch |
| Fishing neck | 1.375inch-1.75inch |
| Connection | 15/16UN 1-1/16UN |
| Material | Alloy Steel&Nickel Alloy |
| Brand Name | Ruixin |
| Model Number | 2.375inch-5.5inch |
| Certification | API |
| Place of Origin | China Baoji |
View Detail Information
Explore similar products
Alloy Steel Wireline Pressure Gauge Hanger Anti Blow Up QLS 2.125 Inch
Nickel Alloy/ Alloy Steel Wireline Slickline Tubing Stop Joints 2-7/8inch
QLS Wireline Anti Blow Up Tool 1.875inch Wireline Construction Tools
Anti Blow Up Wireline Pressure Gauge Hanger 2.875 Inch
Product Specification
| Payment Terms | T/T | Supply Ability | 1 set 3 weeks |
| Delivery Time | 3-4 weeks | Packaging Details | Wooden Box |
| Name | 2 Inch Anti Blow-up Wireline Pressure Gauge Hanger | Size | 2.375inch-5.5inch |
| Fishing neck | 1.375inch-1.75inch | Connection | 15/16UN 1-1/16UN |
| Material | Alloy Steel&Nickel Alloy | Brand Name | Ruixin |
| Model Number | 2.375inch-5.5inch | Certification | API |
| Place of Origin | China Baoji | ||
| High Light | 3 Inch Wireline Downhole Instrument Hangers ，Downhole Instrument Hanger 15/16UN ，Anti Moving Downhole Instrument Hanger | ||
2 Inch Anti Blow-up Wireline Pressure Gauge Hanger
I. Overview:
Anti-moving tool is a kind of tool connected in tool string to prevent tool string from running up. It can not only be connected to downhole instruments separately, but also can be connected to the upper part of downhole tool string.
II. Technical parameters:
| Size | Fishing neck |
Connection
|
| 2-3/8＂ | 1.375＂ | 15/16UN |
| 2-7/8＂ | 1.375＂ | 15/16UN |
| 3-1/2＂ | 1.375＂ | 15/16UN |
| 4-1/2＂ | 1.75＂ | 1-1/16UN |
| 5-1/2＂ | 1.75＂ | 1-1/16UN |
III. Structural characteristics:
The anti-moving tool mainly consists of upper joint, supporting claw, cone cap, mandrel, nut and spring. Before going down the well, the tool or instrument connected to the pressure gauge hanger must make the supporting claw retract into the upper joint. If the weight of the pressure gauge is not enough to retract the supporting claw, a section of weighting rod can be connected. When the upward thrust of downhole fluid is greater than the weight of the tool, the mandrel will be pushed to move upwards, and the cone cap fixed on the mandrel will push up the supporting claw and open it to bite on the inner wall of the tubing to prevent upward channeling.
IV. Usage:
1. Connect the downhole tool string or instrument to the lower part of the anti-moving tool and tighten the thread;
2. Lift the tool string, whether the check card claw can be retracted into the body;
3. Connect the upper end of the anti-moving tool under the rope cap, and tighten the thread (if the instrument is dropped, it is necessary to connect the anti-moving tool to the dropping joint of the dropping tool);
4. Install the assembled tool string into the blowout preventer;
5. Assemble the ground blowout prevention system;
6. Open the wellhead and let the tools go down;
7. After the operation is completed, the tools can be lifted up. Note: When running in and out of the tool, it shall not be jarred, so as to prevent the tool from being damaged due to the clamping claw on the inner wall of the oil pipe.
V. Maintenance:
1. After the tool goes down once, it should be disassembled to check the damage of each part, and the damaged parts should be replaced.
2. Clean all parts and reassemble the tools. When assembling, the thread surface should be coated with a thin layer of grease.
3. After assembly, check whether the action is flexible and free, mark it properly, and install thread protector for storage.
Welcome to contact us at any time.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2012
Total Annual:
200-500
Employee Number:
One~Fifty
Ecer Certification：
Verified Supplier
Ruixin Energy Equipment Ruixin Energy Equipment is slickline manufacturer focused on wireline PCE , wireline tools, coiled tubing tools, etc.. Our factory and technology R & D center is Located in the national technology enterprise incubation industry park - 401B, High-... Ruixin Energy Equipment Ruixin Energy Equipment is slickline manufacturer focused on wireline PCE , wireline tools, coiled tubing tools, etc.. Our factory and technology R & D center is Located in the national technology enterprise incubation industry park - 401B, High-...
Get in touch with us
Leave a Message, we will call you back quickly!